Introduction
In previous posts I looked at receiving ADS-B using SDRangel and Multipsk. In this post I look at the latest version of SDRangel with multiple workspaces W0 & W1.
ADS-B Rx Configuration
In order to have an uncluttered receive window, I used two workspaces in SDRangel. The first workspace as shown in Figure 1 has the Receive Device for the RTL-SDR and the ADS-B Demodulator. The second workspace as shown in Figure 2 has the Map feature.
Please send your comments, questions and suggestions to:
contact:
References
#1. “RTL-SDR for AIS & ADS-B on SDRangel Local Map”
https://jeremyclark.ca/wp/telecom/rtl-sdr-for-ais-ads-b-on-sdrangel-local-map/
#2. – “RTL-SDR for AIS & ADS-B on OpenCPN”
https://jeremyclark.ca/wp/telecom/rtl-sdr-for-ais-ads-b-on-opencpn/
#3. – “RTL-SDR for ADS-B with Multipsk on Local Map”
https://jeremyclark.ca/wp/telecom/rtl-sdr-for-ads-b-with-multipsk-on-local-map/
#4. – “RTL-SDR for AIS & ADS-B on OpenCPN”
https://jeremyclark.ca/wp/telecom/rtl-sdr-for-ais-ads-b-on-opencpn/
